Welded Wire Mesh Panels-Hot Dipped Galvanized After Welding
Products introduction:
The welded wire mesh panels is convenient for construction on the
building, and the quality is well guaranteed. In addition, it has
been made according to the design drawings in the factory and paved
on the site. Compared with the traditional on-site manual binding,
it can ensure the project quality, shorten the construction
progress and the construction period. To enhance the tensile
resistance of wall buildings and prevent earthquakes, the hot
dipped galvanized welded wire mesh panels are also widely used in
rural housing construction.
Production technology:
Hot-dip galvanizing process is a long-term anti-corrosion
technology, which usually consists of pre-plating, hot-dip
galvanizing and post-plating treatment. Pre-plating treatment
includes degreasing and degreasing, acid cleaning and rust removal,
solvent-assisted plating, drying and other processes, and
post-plating treatment includes cooling, passivation and plating
piece repair. The process includes: degreasing - water washing -
acid washing - water washing - plating agent - drying - hot dip
plating - cooling - passivation – maintenance. So the welded wire
mesh panels is high anticorrosion with a life span of min. 10
years.
Material inspection:
| Chemical compositions |
| C | Si | Mn | P | S |
| ≤0.10 | ≤0.30 | ≤0.60 | ≤0.035 | ≤0.035 |
| Tensile Strength |
| Horizontal wires: 600 to 810 N/mm2. | Vertical wires: 400 to 550 N/mm2. |
Selling points:
For different uses have different demands for it, there are many
kinds of welded wire mesh panels. There are black wire mesh,
galvanized mesh, steel wire mesh, plastic coated mesh, and framed
mesh. It is mainly used for construction project, such as the
external wall insulation, breeding bottom net, breeding fence net,
industrial and agricultural greenhouse flower net, seedling net,
coal mine roof protection, etc.
Points for attention:
What should we pay attention to when purchasing such products?When
purchasing welded wire mesh panels, we should pay attention to
whether the welding points of the panels are firm or not. Because
these panels will be handled frequently, if the welding points of
the panels are not firm, the welding points will be open.
But if we purchase low-quality material of the panels, the
probability of opening welding is large in the process of use, and
it will increase the cost of the project, meantime will delay the
progress of the project.
So you should choose high quality materials for the welded wire
mesh panels.
Specifications:
| Specifications |
| Hole Size | Wire Diameter |
| inch | mm | BWG |
| 1/4’’ X 1/4’’ | 6.4 X 6.4 | 22, 23, 24 |
| 3/8’’ X3/8’’ | 10.6 X 10.6 | 19, 20, 21, 22 |
| 1/2’’ X 1/2’’ | 12.7 X 12.7 | 16, 17, 18, 19, 20, 21, 22, 23 |
| 5/8’’ X5/8’’ | 16 X 16 | 18, 19, 20, 21 |
| 3/4’’ X 3/4’’ | 19 X 19 | 16, 17, 18, 19, 20, 21 |
| 1’’ X 1/2’’ | 25.4 X 12.7 | 16, 17, 18, 19, 20, 21 |
| 1-1/2’’ X 1-1/2’’ | 38 X 38 | 14, 15, 16, 17, 18, 19 |
| 1’’ X 2’’ | 25.4 X 50.8 | 14, 15, 16 |
| 2’’ X 2’’ | 50.8 X 50.8 | 12, 13, 14, 15, 16, |
| NOTE: Customs sizes can also be accepted. |
